All Products

Laser Engraved on a 31" x 8.5" Maple hardwood skateboard The Kush Kings are some of the most influential artists in the Hip Hop world. Also known for their love of Miss Mary Jane. (artists from top to bottom: Red Man, Method Man, B-Real, Snoop Lion aka Snoop Dog). Only 10 of these will made for Batch 1.

Please allow up to two weeks for shipping.

The Crew from the short lived, but not forgotten show of firefly, traveled around in this ship "serenity". The ship is surrounded by I'm a leaf in the wind Victorian boarder. Along with one of the many planets they frequented as the backdrop to this beautiful creation.

Laser engraved on approximately 11.5" x 17.5" Cherry Hardwood. Batch 1 will be limited to 50, once they sell out they go into the vault. After they sell out online the only way to get them, is to come grab one of the select few that have been put off to the side for conventions only!!

Please Allow Two to Three weeks for shipping

Laser engraved on approximately 11.5" x 17.5" Cherry Hardwood.

Be sure to select Ouija and Planchette from the drop down if you would like the Planchette to come with this piece.

Batch 1 will be limited to 50.  After they sell out online the only way to get them, is to come grab one of the select few that have been put off to the side for conventions only!!

Please Allow Two to Three weeks for shipping

A 8.375" x 32.5" Laser engraved skateboard on maple hardwood our very first laser engraved piece, you know what they say, "go big or go home". It was quite a lot of work, and one we are most proud of, the name of this piece is sweet and sour because of all the characters on the deck are either sweet or...not so sweet. who doesnt love cute things! Only 20 of these will be made for Batch 1. 

Please Allow up to two weeks for shipping

Here it is folks! The one you've all been waiting for! A custom size plaque of NES mash up games to hang on your wall. We hope when you see this piece, it brings you back to sitting in front of the TV and playing these games for hours on end. We tried to add as many classic games as we could and some hidden gems. The Start, Select, and D-pad buttons are made with Walnut, and the A, B, buttons are made out of Cedar. Can you spot all the games?!

Laser engraved on approximately 17.25" x 7.5" Cherry Hardwood. Batch 1 will be limited to 50. After they sell out online the only way to get them, is to come grab one of the select few that have been put off to the side for conventions only!!

Please Allow Two to Three weeks for shipping

Teenage Mutant Ninja Turtles, Teenage Mutant Ninja Turtles, Teenage Mutant Ninja Turtles, Heroes in a half-shell! Turtle power! Another game from our childhood that was fun but incredibly hard to beat! The front of the controller we have the top down view part of the game where you can drive around the city and fight foot soldiers. In the middle of the controller you have to beat Rocksteady and Bebop to save April. Then on to the next challenge of defeating Mechaturtle while saving Master Splinter. On the Backside of the controller we see Raph, Mich, and Leo navigating through difficult levels while defeating enemies and Don is fighting Big Mouser while mousers are dropping on his head!

Laser engraved on approximately 5.15 x2.25 " Cherry Hardwood, birch wood buttons.

Please Allow Two to Three weeks for shipping.

Batch 1 will be limited to 50, Special edition TMNT will be limited to 25 making a total of 75 controllers.  After they sell out online the only way to get them, is to come grab one of the select few that have been put off to the side for conventions only!!

Teenage Mutant Ninja Turtles, Teenage Mutant Ninja Turtles, Teenage Mutant Ninja Turtles, Heroes in a half-shell! Turtle power! Another game from our childhood that was fun but incredibly hard to beat! The front of the controller we have the top down view part of the game where you can drive around the city and fight foot soldiers. In the middle of the controller you have to beat Rocksteady and Bebop to save April. Then on to the next challenge of defeating Mechaturtle while saving Master Splinter. On the Backside of the controller we see Raph, Mich, and Leo navigating through difficult levels while defeating enemies and Don is fighting Big Mouser while mousers are dropping on his head!

Laser engraved on approximately 5.15 x2.25 " Cherry Hardwood, The Dpad and Start/ Select buttons are made with Walnut and the A/B buttons and Stand inlay are Cedar.

***Please keep in mind the cedar wood (A B buttons and Stand) will vary in tonal color*** ***

This cedar will be more red then white in tone***

Please Allow Two to Three weeks for shipping.

Batch 1 will be limited to 50, Special edition TMNT will be limited to 25 making a total of 75 controllers.  After they sell out online the only way to get them, is to come grab one of the select few that have been put off to the side for conventions only!!

**please pick controller + stand, if you would like a stand. Located in the drop down menu***

Zelda 2.0 special edition controllers are here! We did something special for this one. Here is your chance to get a zelda controller if you happen to miss out in the past. It is the same design as Zelda 2.0 made with the special edition buttons. On the front of the controller, you can see Link fight his way through the map to try to get to the dungeon. He finally is able to make is way to one by crossing the dangerous waters and defeating his enemies. On the back you can see him navigating through the different dungeons to defeat Gannon and saving the princess. It's a true love story!

Engraved on approximately 5.15 x2.25 " Cherry Hardwood with walnut D pad, and start select buttons. And cedar A B buttons. As well as cedar inlay for the stand. Version 2.0 Special edition of this release will consist of 50 controllers labeled and numbered.

After they sell out online the only way to get them, is to come grab one of the select few that have been put off to the side for conventions only!!

Please allow Two to Three weeks for shipping.

***FRAME NOT INCLUDED***

Here it is folks! The one you've all been waiting for! A full size plaque of NES mash up games to hang on your wall. We hope when you see this piece, it brings you back to sitting in front of the TV and playing these games for hours on end. We tried to add as many classic games as we could and some hidden gems. The Start, Select, and D-pad buttons are made with Walnut, and the A, B, buttons are made out of Cedar. Can you spot all the games?!

Laser engraved on approximately 23" x 10 " Cherry Hardwood, with Walnut and Cedar buttons. Batch 1 will be limited to 50. After they sell out online the only way to get them, is to come grab one of the select few that have been put off to the side for conventions only!!

Please Allow Two to Three weeks for shipping

The Cartridge of the TMNT game is here! This cartridge complements the controller.
On the front of the cartridge, we have the Impossible, Infamous, Notorious, one of the hardest levels to beat in a game water level. Once you defeated that level you are on your way to defeating Technodrome!
On the back we see the guys navigating through the treacherous levels to go and fight Shredder shooting his ray gun!

Engraved on approximately 5.25 x4.75 " Cherry Hardwood with Birch inlay

Version 1.0 of this release will consist of 50 cartridges labeled and numbered. After they sell out online the only way to get them, is to come to grab one of the select few that have been put off to the side for conventions only!!

***Please Note*** Con batches are meant to be sold in person, so some of the wood may have some blemishes (dark grains running though the art, or naturally occurring knots in the wood). We save these specifically for conventions so people can see it in person and decide wither or not they are okay with it. If you would like to see a picture prior to us mailing it out please send us a direct email at info@spitfirelabs.nyc with your order number and item.  All "Con Batch" items Do Not have numbers, in place of numbers it will read "ConBatch"

The Cartridge of the TMNT game is back! This cartridge complements the controller.
On the front of the cartridge, we have the Impossible, Infamous, Notorious, one of the hardest levels to beat in a game water level. Once you defeated that level you are on your way to defeating Technodrome!
On the back we see the guys navigating through the treacherous levels to go and fight Shredder shooting his ray gun!

Engraved on approximately 5.25 x4.75 " Cherry Hardwood with Birch inlay

Please allow two to three weeks for shipping. 

***Due to Covid-19 to limit everyone's exposure we will only be dropping off to the post office once per week.**

Is this a wooden Metroid Cartridge!? Why yes it is!! Metroid is one of those games that has a special place in our hearts, and we wanted to show our love to the game with this piece. We only made 50 of these and you can buy a stand separately on the site. On the front of the cartridge you can see we tried to mix all the caver levels that Samus has to fight through to defeat the Mother Brain. On the back she fights her way to the Heart while battling the Alien invasion.

Engraved on approximately 5.25 x4.75 " Cherry Hardwood with Birch inlay buttons Version 1.0 of this release will consist of 50 cartridges labeled and numbered. After they sell out online the only way to get them, is to come grab one of the select few that have been put off to the side for conventions only!!

***THESE ARE DIY STANDS****

they will ship NOT assembled

**DROP DOWN MENU be sure to choose the right one!! Metroid or Zelda**

These stands are for our cartridges. They have a steel plate on the front for to add a game magnet of your choice of Metroid or Zelda.

The stands are made from cherry veneer with a MDF core. The magnet consists or birch wood icon with a magnet already attached. They are approximately 5.25 x 3.375 x 3.75" you will need: clamps , or if you do not have clamps you can either use string, or a tight rubber band and some wood glue.