All Products

Inspired by the new school form of flash tattoo art, this cobra is coiled up around this beautiful red (or not) rose and dagger.

Please be sure to chose "Cobra Glitter" from the menu if you would like the rose painted red, for that extra bling, bling!

Engraved on approximately 5"x7" Cherry Hardwood.

Batch 1 of this release will consist of 50 Plaques labeled and numbered.  After they sell out online the only way to get them, is to come grab one of the select few that have been put off to the side for conventions only!!

Please allow Two to Three weeks for shipping.

This is a big What if Mother Brain found a way to leave her universe and take control of both Bowser and Ganon. Corruption of all three universes takes place and Link pursues the quest to figure out what is happening. On his quest for answers Link teams up with Mario and Samus to take down this Evil Trinity. Art credit: George Vega you can find him here: George Vega Art

Laser engraved on approximately 11.5" x 17.5" Cherry Hardwood. Limited to 50, once they sell out they will be gone for good!

Please Allow Two to Three weeks for shipping

Large Finn is engraved on 12 x 12 Cherry hardwood

Small Finn is engraved on 5 x 5 Cherry Hardwood

***chose size from the drop down menu***

We teamed up with Kevin from MDBX Studios and came up with sweet little collab. Batch 1 will be limited to 50. After they sell out online the only way to get them, is to come grab one of the select few that have been put off to the side for conventions only!!

The inlay's consist of Cherry, Maple, and walnut

Please Allow Two to Three weeks for shipping

Large Jake is engraved on 12 x 12 Cherry hardwood.

Small Jake is engraved on 5 x 5 Cherry Hardwood.

 ***chose size from the drop down menu***

We teamed up with Kevin from MDBX Studios and came up with sweet little collab. Batch 1 will be limited to 50. After they sell out online the only way to get them, is to come grab one of the select few that have been put off to the side for conventions only!!

Inlay's consist of cherry, maple, and walnut.

Please Allow Two to Three weeks for shipping

Large Bubble-gum is engraved on 12 x 12 Cherry hardwood.

Small Bubble-gum is engraved on 5 x 5 Cherry Hardwood.

 ***chose size from the drop down menu***

We teamed up with Kevin from MDBX Studios and came up with sweet little collab. Batch 1 will be limited to 50. After they sell out online the only way to get them, is to come grab one of the select few that have been put off to the side for conventions only!!

Inlay's consist of cherry, maple, and walnut.

Please Allow Two to Three weeks for shipping

**please pick which version you would like using the drop down menu***

Super Mario World are here! On the front we have Mario dodging Bullet bill and defeating Koopa Troopas.  With the help of Yoshi he's able to swallow his enemies and collect his yoshi coins.  On the back we have him fighting through King Koopas dungeons to finally defeat King Koopa! 

Engraved on approximately 5.635 x 2.313" CNCed out Cherry Hardwood controller with birch plywood inlay. 

Super Mario World Batch 1 will be limited to 50. After they sell out online the only way to get them, is to come grab one of the select few that have been put off to the side for conventions only!!

 The Stand is approximately 1.75 x 1.75 x 3.875 with birch plywood inlay

Please allow Two to Three weeks for shipping.

***Due to Covid-19 to limit everyone's exposure we will only be dropping off to the post office once per week.***

**please pick which version you would like using the drop down menu***

Super Mario World are here! On the front we have Mario dodging Bullet bill and defeating Koopa Troopas.  With the help of Yoshi he's able to swallow his enemies and collect his yoshi coins.  On the back we have him fighting through King Koopas dungeons to finally defeat King Koopa!

Engraved on approximately 5.635 x 2.313" CNCed out Cherry Hardwood controller with CNCed out Cherry Buttons. 

Super Mario World Special Edition Batch 1 will be limited to 35. After they sell out online the only way to get them, is to come grab one of the select few that have been put off to the side for conventions only!!

The Stand is approximately 1.75 x 1.75 x 3.875 with cherry wood inlay

Please allow Two to Three weeks for shipping.

***Due to Covid-19 to limit everyone's exposure we will only be dropping off to the post office once per week.***

**please pick which version you would like using the drop down menu***

Here we have our Super Mario World shadow box version.  This is the first of many shadowboxes to come.  When you open up the cover you can see Mario jumping into a CNCed pipe to escape all of his enemies.  A CNCed Banzai Bill is barreling down on him while he has the help of Yoshi to defeat the level.  

The controller is approximately 5.635 x 2.313", with 11 layers glued together. We have some elements that are CNCed out and lasered out of Cherry Hardwood. The front cover of the controller has CNCed out Cherry Buttons. 

**The cover is fragile so please open it carefully. There are a lot of small parts, this is not a toy. Please keep away from small children and animals.**

Super Mario World Shadowbox Batch 1 will be limited to 35. After they sell out online the only way to get them, is to come grab one of the select few that have been put off to the side for conventions only!! 

Please allow Two to Three weeks for shipping.

**Please Note** Con batches are meant to be sold in person, so some of the wood may have some blemishes (dark grains running though the art, or naturally occurring knots in the wood). We save these specifically for conventions so people can see it in person and decide wither or not they are okay with it. If you would like to see a picture prior to us mailing it out please send us a direct email at info@spitfirelabs.nyc with your order number. 

Convention Batch TMNT please chose from the menu if you would like the Special edition, or original.  The Design is the same, only difference is the buttons. Convention batches also do not have a number but instead it will say "con batch" in place of the number.

Please allow Two to Three weeks for shipping.

***Please Note*** Con batches are meant to be sold in person, so some of the wood may have some blemishes (dark grains running though the art, or naturally occurring knots in the wood). We save these specifically for conventions so people can see it in person and decide wither or not they are okay with it. If you would like to see a picture prior to us mailing it out please send us a direct email at info@spitfirelabs.nyc with your order number and item.  All "Con Batch" items Do Not have numbers, in place of numbers it will read "ConBatch"

**please pick which version you would like using the drop down menu***

Mario 2.0 controllers are back! Here is your chance to get a Mario controller if you happen to miss out in the past. It is the same design as Mario 2.0. On this Super Mario Bros. version we have Mario dodging bullets and hammers while jumping on turtles to get the the castle. He finds the secret tunnels and vines for the extra coin. On the back he has to swim his way through fiery squid infested water level and then go and try to defeat Bowser to save the princess!

Engraved on approximately 5.15 x2.25 " Cherry Hardwood with wood inlay D pad, start select buttons, and A B buttons. 

Please allow Two to Three weeks for shipping.

***Please Note*** Con batches are meant to be sold in person, so some of the wood may have some blemishes (dark grains running though the art, or naturally occurring knots in the wood). We save these specifically for conventions so people can see it in person and decide wither or not they are okay with it. If you would like to see a picture prior to us mailing it out please send us a direct email at info@spitfirelabs.nyc with your order number and item.  All "Con Batch" items Do Not have numbers, in place of numbers it will read "ConBatch"

**please pick which version you would like using the drop down menu***

Zelda 2.0  controllers are back! Here is your chance to get a zelda controller if you happen to miss out in the past. It is the same design as Zelda 2.0  On the front of the controller, you can see Link fight his way through the map to try to get to the dungeon. He finally is able to make is way to one by crossing the dangerous waters and defeating his enemies. On the back you can see him navigating through the different dungeons to defeat Gannon and saving the princess. It's a true love story!

Engraved on approximately 5.15 x2.25 " Cherry Hardwood with wood inlay D pad, start select buttons, and A B buttons.

Please allow Two to Three weeks for shipping.

***Please Note*** Con batches are meant to be sold in person, so some of the wood may have some blemishes (dark grains running though the art, or naturally occurring knots in the wood). We save these specifically for conventions so people can see it in person and decide wither or not they are okay with it. If you would like to see a picture prior to us mailing it out please send us a direct email at info@spitfirelabs.nyc with your order number and item.  All "Con Batch" items Do Not have numbers, in place of numbers it will read "ConBatch"

**please pick which version you would like using the drop down menu***

Contra 2.0  controllers are back! Here is your chance to get a Contra controller if you happen to miss out in the past. On the front we have Bill and Lance trying to defeat Godomuga, Gromaides, and the Defense wall. On the back we have them fighting their way through the level to get to Gomeramos King. Make sure you use the code!

Engraved on approximately 5.15 x2.25 " Cherry Hardwood with wood inlay D pad, start select buttons, and A B buttons.

Please allow Two to Three weeks for shipping.

***Due to Covid-19 to limit everyone's exposure we will only be dropping off to the post office once per week.**

**please pick controller + stand, if you would like a stand. Located in the drop down menu***

Metroid 2.0 special edition controllers are here! We designed this one to compliment the first batch and the cartridge. On the front of the controller, We have Samus working her way through the levels while trying to get upgrades to defeat one of the hardest bosses, Kraid! On the back you see her trying to defeat Ridley, so she can fight her way to get to Mother Brain.

Engraved on approximately 5.15 x2.25 " Cherry Hardwood with birch buttons. . As well as birch inlay for the stand.

Version 2.0 Special edition of this release will consist of 50 controllers labeled and numbered.  After they sell out online the only way to get them, is to come grab one of the select few that have been put off to the side for conventions only!!

Please allow Two to Three weeks for shipping.

A custom size plaque of NES mash up games to hang on your wall. We hope when you see this piece, it brings you back to sitting in front of the TV and playing these games for hours on end. We tried to add as many classic games as we could and some hidden gems. The Start, Select, and D-pad buttons are made with Walnut, and the A, B, buttons are made out of Cedar. Can you spot all the games?!

Laser engraved on approximately 17.25" x 7.5" Cherry Hardwood. 

Please Allow Two to Three weeks for shipping

Designed by the one and only liftevil himself. These hoodies are 100% insanely soft and purely evil polyester, the outside is a soft slick feel while the inside is a nice fleece! Front design is the official spitfire labs logo. On the back is a super badass skull demon surrounded by the spitfire logo.

**runs a smig small**

Please allow two to three weeks for delivery

Designed by the one and only liftevil himself. This Dark Grey shirt is super soft and pre-shrunk. it is 65%polyester and 35% cotton. Front design is the official spitfire labs logo. On the back is a super badass skull demon surrounded by the spitfire logo. This snazzy v neck is super soft and pre-shrunk shirt is 65% polyester and 35% Cotton.

**Runs a bit small**

GURRL!! you can either get one of 2 DESIGNS for this v neck!!...or both The demon either comes with a cute bow to add that feminine touch, or you can get it without.

Please allow Two to Three weeks for shipping

Designed by the one and only liftevil himself. This Dark Grey shirt is supper soft and pre shrunk. it is 65%polyester and 35% cotton. Front design is the official spitfire labs logo. On the back is a super badass skull demon surrounded by the spitfire logo.

This pre-shrunk shirt is 65% polyester, and 35% Cotton.

Please allow two to three weeks for delivery