All Products

***Made to ORDER***

We are going to do our best to get it to you in a timely fashion, but please note, these are very labor intensive pieces and take roughly 4 day per individual piece.  Rough estimate for shipping is approximately 3 weeks. 

We will be offering a framed option as well for this release. Please select from the drop down menu if you would like it framed. The Frame will be a simple but elegant black frame. Framing will add to delivery time by about a week.

what can we say? we love supernatural, we love the fandom, we love the show. We were sad to see it end but so happy it actually happened.  It's strange to say a show lifts you up out of a funk, but somehow this show did just that. We hope we did it justice. 

 Engraved on approximately 23" x 10 " Cherry Hardwood, with bright blue epoxy resin as the back drop with the signature supernatural pentagram from the opening title card from season 10. The pentagram is hand painted in white acrylic. Baby is the main focus with the trunk open to display all the weapons she holds. The frame is a Victorian in style with some Easter eggs hidden within. Happy Hunting! 

 **The Resin design will vary which makes it a one of a kind piece, but will be made to mimic the style in the pictures.

May the Force be with you! Is the Dark side calling you? well here is a little something to feed your calling. Darth Vader is front and center surrounded by a Victorian boarder, with Vader's Tie fighter in each corner and the Death Star (still intact) in the background completes this piece.

Laser engraved on approximately 11.5" x 17.5" Cherry Hardwood.

Batch 1 will be limited to 50. After they sell out online the only way to get them, is to come grab one of the select few that have been put off to the side for conventions only!!

Please Allow Two to Three weeks for shipping.

May the Force be with you! Is the Dark side calling you? well here is a little something to feed your calling. Darth Vader is front and center surrounded by a Victorian boarder, with Vader's Tie fighter in each corner and the Death Star (still intact) in the background completes this piece.

Laser engraved on approximately 5" x 7"" Cherry Hardwood.

Batch 1 will be limited to 50. After they sell out online the only way to get them, is to come grab one of the select few that have been put off to the side for conventions only!!

Please Allow Two to Three weeks for shipping.

This is the way! who doesn't love baby Yoda?

Yes we know his name is Grogu, but he will always be baby Yoda in our house.

Baby Yoda is centrally located holding his cup, surrounded by a Victorian frame, with Mando's ship in all four corners. The symbols in the corners are the Mandalorian symbol and the symbol that represents "the clan of two". 

Laser engraved on approximately 5" x 7" Cherry Hardwood. Batch 1 will be limited to 50. After they sell out online the only way to get them, is to come to grab one of the select few that have been put off to the side for conventions only!!

Please Allow Two to Three weeks for shipping

***Due to Covid-19 to limit everyone's exposure we will only be dropping off to the post office once per week.***

***Made to ORDER***

We are going to do our best to get it to you in a timely fashion, but please note, these are very labor intensive pieces and take roughly 4 day per individual piece.  Rough estimate for shipping is approximately 3 weeks. 

We will be offering a framed option as well for this release. Please select from the drop down menu if you would like it framed. The Frame will be a simple but elegant black frame. Framing will add to delivery time by about a week.

***Note there may be some small bleeding into the wood from the color pigment***

Engraved on Cherry Hardwood the size is approximately 17" x 7.5" The space background is done in resin, meant to imitate a nebula. Every single resin pour will be completely unique. No two nebula's will look alike. This is truly one of a kind piece. The stars are hand-painted with white acrylic paint. This particular Enterprise is Captain Picard's ship from star trek next generation.

***Made to ORDER***

We are going to do our best to get it to you in a timely fashion, but please note, these are very labor intensive pieces and take roughly 4 day per individual piece.  Rough estimate for shipping is approximately 3 weeks. 

We will be offering a framed option as well for this release. Please select from the drop down menu if you would like it framed. The Frame will be a simple but elegant black frame. Framing will add to delivery time by about a week.

***Note there will be some small bleeding into the wood from the color pigment***

Laser engraved on approximately 23" x 10 " Cherry Hardwood, with Cherry wood inlays. The space background is done in resin, meant to imitate a nebula. Every single resin pour will be completely unique. No two nebula's will look alike. This is truly a one of a kind piece. The stars are hand painted with white acrylic paint. Same as the smaller USS Enterprise, except the hull, and nacelle will be inlayed in cherry hardwood. This particular Enterprise is Captain Picard's ship from star trek next generation.

Laser engraved on approximately 11.5" x 17.5" Cherry Hardwood. 

As you can see the board has the blood of your enemies, with the inscription of "Long live the empire" and "For the honor and glory" 

The Klingon letters and emblem are made with 1/8" birch wood and red textured paper in the background.  The design itself is meant to mimic a Bird-of-Prey warship.

Kahless bat'leth is made from steel and is wrapped in a faux leather strap.  It has pattern markings of Kahless and the Emblem in the middle. It is cut with a water jet and is not sharp to the touch but the pointed ends can cause damage or harm so please be careful! It is held in place with magnets, and can come off/on with ease. When removing the bat’leth please lift bottom up to prevent scratches to the art work.

Qapla! 

**The Bat'leth is not a toy, please keep away from children.**

Batch 1 will be limited to 50. After they sell out online the only way to get them, is to come grab one of the select few that have been put off to the side for conventions only!!

These are made to order so please allow two to three weeks for shipping.

Klingon Special Edition Walnut.

Laser engraved on approximately 11.5" x 17.5" Cherry Hardwood. 

As you can see the board has the blood of your enemies, with the inscription of "Long live the empire" and "For the honor and glory" 

The Klingon letters are outlined with 1/8" cherry with walnut inlay and red textured paper in the background.  The Klingon emblem has an outline and circle made from walnut with a cherry inlay and the same textured red paper. The design itself is meant to mimic a Bird-of-Prey warship.

The house of Mogh and house of Kor emblems are CNCed out of 1/2" solid cherry wood.  

Kahless bat'leth is made from steel, cut with a water jet, and wrapped in a faux leather strap.  It is not sharp to touch but the pointed ends can cause damage or harm so please be careful! It is held in place with magnets, and can come off/on with ease. When removing the bat’leth please lift bottom up to prevent scratches to the art work.

Qapla! 

**The Bat'leth is not a toy, please keep away from children.**

Batch 1 will be limited to 25. After they sell out online the only way to get them is to grab one of the select few we have been put off to the side for conventions only!!

These are made to order so please allow two to three weeks for shipping.

Klingon Special Edition Cherry

Laser engraved on approximately 11.5" x 17.5" Cherry Hardwood. 

As you can see the board has the blood of your enemies, with the inscription of "Long live the empire" and "For the honor and glory" 

The Klingon letters are outlined with 1/8" walnut with cherry inlay and red textured paper in the background.  The Klingon emblem has an outline and circle made from cherry with a walnut inlay and the same textured red paper. The design itself is meant to mimic a Bird-of-Prey warship.

The house of Mogh and house of Kor emblems are CNCed out of 1/2" solid cherry wood.  

Kahless bat'leth is made from steel, cut with a water jet, and wrapped in a faux leather strap.  It is not sharp to touch but the pointed ends can cause damage or harm so please be careful! It is held in place with magnets, and can come off/on with ease. When removing the bat’leth please lift bottom up to prevent scratches to the art work.

Qapla! 

**The Bat'leth is not a toy, please keep away from children.**

Batch 1 will be limited to 25. After they sell out online the only way to get them is to grab one of the select few we have put off to the side for conventions only!!

These are made to order so please allow two to three weeks for shipping.

Heghlu’meH QaQ jajvam!! (Today is a good day to die!!) All Star Trek fans know the greatest warriors are Klingons. They are ruthlessness and brutal but with militaristic traits of the of honor and strict warrior code. This piece is not only a tribute to Klingons but Kahless, with the bat'leth of Kahless on either side of the logo. Qapla'

Engraved on approximately 5"x7" Cherry Hardwood, with birch plywood inlay and red paper for color. Batch 1 of this release will consist of 50 Plaques labeled and numbered.  After they sell out online the only way to get them, is to come grab one of the select few that have been put off to the side for conventions only!!

Please allow Two to Three weeks for shipping.

Weither you are Dark side or Light side of the force, you can truly appreciate the beauty and magnitude of this epic star station! This is Batch 2 of our Death Star. Batch 1 was sold only at conventions. The difference is Batch 2 is a solid piece. Batch 1, was much like our mini Death star, which has a birch inlay.

Laser engraved on approximately 11.5" x 17.5" Cherry Hardwood. Batch 2 will be limited to 50. After they sell out online the only way to get them, is to come grab one of the select few that have been put off to the side for conventions only!!

Please Allow Two to Three weeks for shipping.

This Millennium Falcon is designed to see the outer hull and inner workings of this starship. It is split right up the center so you can check out the inner schematics, yet still, appreciate the beauty of the outer operations of the ship.

This is Batch 2 of our Millennium Falcon. Batch 1 was sold only at conventions. The difference is Batch 2 is a solid piece. Batch 1, was much like our mini Millennium Falcon, which has a birch inlay.

Laser engraved on approximately 11.5" x 17.5" Cherry Hardwood. Batch 1 will be limited to 50. After they sell out online the only way to get them, is to come to grab one of the select few that have been put off to the side for conventions only!!

Please Allow Two to Three weeks for shipping.

The Crew from the short lived, but not forgotten show of firefly, traveled around in this ship "serenity". The ship is surrounded by I'm a leaf in the wind Victorian boarder. Along with one of the many planets they frequented as the backdrop to this beautiful creation.

Laser engraved on approximately 11.5" x 17.5" Cherry Hardwood. Batch 1 will be limited to 50, once they sell out they go into the vault. After they sell out online the only way to get them, is to come grab one of the select few that have been put off to the side for conventions only!!

Please Allow Two to Three weeks for shipping

Harness the power of the Dark Side to keep your keys in check with this Darth Vader key chain holder. Crafted from rich cherry wood, this striking piece features a CNC-carved walnut Vader mask, adding depth and contrast worthy of a Sith Lord. Equipped with three powerful magnets, it securely holds your keys, tools, or anything metal with the force of a true Empire enforcer.

Perfect for Star Wars fans, collectors, and anyone who prefers their organization with a touch of menace, this handcrafted key holder is both a functional and artistic statement. Whether mounted by your door or in your workspace, it ensures you'll never lose your keys to the Dark Side again.

Product Details:

🔹 Dimensions: 8.5" x 3.5" x .75"
🔹 Material: Cherry wood base, CNC walnut Vader mask
🔹 Strength: 3 high-powered magnets for secure holding
🔹 Mounting: Easy to install, no Jedi training required
🔹 Perfect Gift: For Star Wars fans, collectors, and Sith Lords in training
🔹 Shipping: made to order 2-3 weeks

Bring balance (and order) to your space—one key at a time.