All Products

***Made to ORDER***

We are going to do our best to get it to you in a timely fashion, but please note, these are very labor intensive pieces and take roughly 4 day per individual piece.  Rough estimate for shipping is approximately 3 weeks. 

We will be offering a framed option as well for this release. Please select from the drop down menu if you would like it framed. The Frame will be a simple but elegant black frame. Framing will add to delivery time by about a week.

****Note of precaution, PLEASE keep away from children, and small animals. If pieces break off they can become a choking hazard. This is meant to be displayed as art, it is not a toy****

***Note there will be some small bleeding into the wood from the color pigment***

Laser engraved on approximately 23" x 10 " Cherry Hardwood, with Cherry wood inlays. Water in done in blue resin. This is the same map as the smaller version, the larger map will have enemies, and link battling enemies placed throughout the map.

***Made to ORDER***

We are going to do our best to get it to you in a timely fashion, but please note, these are very labor intensive pieces and take roughly 4 day per individual piece.  Rough estimate for shipping is approximately 3 weeks. 

We will be offering a framed option as well for this release. Please select from the drop down menu if you would like it framed. The Frame will be a simple but elegant black frame. Framing will add to delivery time by about a week.

****Note of precaution, PLEASE keep away from children, and small animals. If pieces break off they can become a choking hazard. This is meant to be displayed as art, it is not a toy****

***Note there will be some small bleeding into the wood from the color pigment***

Engraved on Cherry Hard wood the sized is approximately 17" x 7.5" with cherry wood inlays. Water is done in blue resin.

Large Finn is engraved on 12 x 12 Cherry hardwood

Small Finn is engraved on 5 x 5 Cherry Hardwood

***chose size from the drop down menu***

We teamed up with Kevin from MDBX Studios and came up with sweet little collab. Batch 1 will be limited to 50. After they sell out online the only way to get them, is to come grab one of the select few that have been put off to the side for conventions only!!

The inlay's consist of Cherry, Maple, and walnut

Please Allow Two to Three weeks for shipping

Large Jake is engraved on 12 x 12 Cherry hardwood.

Small Jake is engraved on 5 x 5 Cherry Hardwood.

 ***chose size from the drop down menu***

We teamed up with Kevin from MDBX Studios and came up with sweet little collab. Batch 1 will be limited to 50. After they sell out online the only way to get them, is to come grab one of the select few that have been put off to the side for conventions only!!

Inlay's consist of cherry, maple, and walnut.

Please Allow Two to Three weeks for shipping

Large Bubble-gum is engraved on 12 x 12 Cherry hardwood.

Small Bubble-gum is engraved on 5 x 5 Cherry Hardwood.

 ***chose size from the drop down menu***

We teamed up with Kevin from MDBX Studios and came up with sweet little collab. Batch 1 will be limited to 50. After they sell out online the only way to get them, is to come grab one of the select few that have been put off to the side for conventions only!!

Inlay's consist of cherry, maple, and walnut.

Please Allow Two to Three weeks for shipping

**please pick which version you would like using the drop down menu***

Here we have our Super Mario World shadow box version.  This is the first of many shadowboxes to come.  When you open up the cover you can see Mario jumping into a CNCed pipe to escape all of his enemies.  A CNCed Banzai Bill is barreling down on him while he has the help of Yoshi to defeat the level.  

The controller is approximately 5.635 x 2.313", with 11 layers glued together. We have some elements that are CNCed out and lasered out of Cherry Hardwood. The front cover of the controller has CNCed out Cherry Buttons. 

**The cover is fragile so please open it carefully. There are a lot of small parts, this is not a toy. Please keep away from small children and animals.**

Super Mario World Shadowbox Batch 1 will be limited to 35. After they sell out online the only way to get them, is to come grab one of the select few that have been put off to the side for conventions only!! 

Please allow Two to Three weeks for shipping.

*** UPS and USPS have already informed everyone that they are severely under staffed for the holiday season.  Please be patient and allow up to three weeks for it to arrive***

**Please Note** Con batches are meant to be sold in person, so some of the wood may have some blemishes (dark grains running though the art, or naturally occurring knots in the wood). We save these specifically for conventions so people can see it in person and decide wither or not they are okay with it. If you would like to see a picture prior to us mailing it out please send us a direct email at info@spitfirelabs.nyc with your order number. 

Convention Batch TMNT please chose from the menu if you would like the Special edition, or original.  The Design is the same, only difference is the buttons. Convention batches also do not have a number but instead it will say "con batch" in place of the number.

Please allow Two to Three weeks for shipping.

***Please Note*** Con batches are meant to be sold in person, so some of the wood may have some blemishes (dark grains running though the art, or naturally occurring knots in the wood). We save these specifically for conventions so people can see it in person and decide wither or not they are okay with it. If you would like to see a picture prior to us mailing it out please send us a direct email at info@spitfirelabs.nyc with your order number and item.  All "Con Batch" items Do Not have numbers, in place of numbers it will read "ConBatch"

**please pick which version you would like using the drop down menu***

Mario 2.0 controllers are back! Here is your chance to get a Mario controller if you happen to miss out in the past. It is the same design as Mario 2.0. On this Super Mario Bros. version we have Mario dodging bullets and hammers while jumping on turtles to get the the castle. He finds the secret tunnels and vines for the extra coin. On the back he has to swim his way through fiery squid infested water level and then go and try to defeat Bowser to save the princess!

Engraved on approximately 5.15 x2.25 " Cherry Hardwood with wood inlay D pad, start select buttons, and A B buttons. 

Please allow Two to Three weeks for shipping.

***Please Note*** Con batches are meant to be sold in person, so some of the wood may have some blemishes (dark grains running though the art, or naturally occurring knots in the wood). We save these specifically for conventions so people can see it in person and decide wither or not they are okay with it. If you would like to see a picture prior to us mailing it out please send us a direct email at info@spitfirelabs.nyc with your order number and item.  All "Con Batch" items Do Not have numbers, in place of numbers it will read "ConBatch"

**please pick which version you would like using the drop down menu***

Zelda 2.0  controllers are back! Here is your chance to get a zelda controller if you happen to miss out in the past. It is the same design as Zelda 2.0  On the front of the controller, you can see Link fight his way through the map to try to get to the dungeon. He finally is able to make is way to one by crossing the dangerous waters and defeating his enemies. On the back you can see him navigating through the different dungeons to defeat Gannon and saving the princess. It's a true love story!

Engraved on approximately 5.15 x2.25 " Cherry Hardwood with wood inlay D pad, start select buttons, and A B buttons.

Please allow Two to Three weeks for shipping.

***Please Note*** Con batches are meant to be sold in person, so some of the wood may have some blemishes (dark grains running though the art, or naturally occurring knots in the wood). We save these specifically for conventions so people can see it in person and decide wither or not they are okay with it. If you would like to see a picture prior to us mailing it out please send us a direct email at info@spitfirelabs.nyc with your order number and item.  All "Con Batch" items Do Not have numbers, in place of numbers it will read "ConBatch"

**please pick which version you would like using the drop down menu***

Contra 2.0  controllers are back! Here is your chance to get a Contra controller if you happen to miss out in the past. On the front we have Bill and Lance trying to defeat Godomuga, Gromaides, and the Defense wall. On the back we have them fighting their way through the level to get to Gomeramos King. Make sure you use the code!

Engraved on approximately 5.15 x2.25 " Cherry Hardwood with wood inlay D pad, start select buttons, and A B buttons.

Please allow Two to Three weeks for shipping.

***Due to Covid-19 to limit everyone's exposure we will only be dropping off to the post office once per week.**

**please pick controller + stand, if you would like a stand. Located in the drop down menu***

Metroid 2.0 special edition controllers are here! We designed this one to compliment the first batch and the cartridge. On the front of the controller, We have Samus working her way through the levels while trying to get upgrades to defeat one of the hardest bosses, Kraid! On the back you see her trying to defeat Ridley, so she can fight her way to get to Mother Brain.

Engraved on approximately 5.15 x2.25 " Cherry Hardwood with birch buttons. . As well as birch inlay for the stand.

Version 2.0 Special edition of this release will consist of 50 controllers labeled and numbered.  After they sell out online the only way to get them, is to come grab one of the select few that have been put off to the side for conventions only!!

Please allow Two to Three weeks for shipping.

Here it is folks! The one you've all been waiting for! A custom size plaque of NES mash up games to hang on your wall. We hope when you see this piece, it brings you back to sitting in front of the TV and playing these games for hours on end. We tried to add as many classic games as we could and some hidden gems. The Start, Select, and D-pad buttons are made with Walnut, and the A, B, buttons are made out of Cedar. Can you spot all the games?!

Laser engraved on approximately 17.25" x 7.5" Cherry Hardwood. Batch 1 will be limited to 50. After they sell out online the only way to get them, is to come grab one of the select few that have been put off to the side for conventions only!!

Please Allow Two to Three weeks for shipping

Teenage Mutant Ninja Turtles, Teenage Mutant Ninja Turtles, Teenage Mutant Ninja Turtles, Heroes in a half-shell! Turtle power! Another game from our childhood that was fun but incredibly hard to beat! The front of the controller we have the top down view part of the game where you can drive around the city and fight foot soldiers. In the middle of the controller you have to beat Rocksteady and Bebop to save April. Then on to the next challenge of defeating Mechaturtle while saving Master Splinter. On the Backside of the controller we see Raph, Mich, and Leo navigating through difficult levels while defeating enemies and Don is fighting Big Mouser while mousers are dropping on his head!

Laser engraved on approximately 5.15 x2.25 " Cherry Hardwood, birch wood buttons.

Please Allow Two to Three weeks for shipping.

Batch 1 will be limited to 50, Special edition TMNT will be limited to 25 making a total of 75 controllers.  After they sell out online the only way to get them, is to come grab one of the select few that have been put off to the side for conventions only!!

Teenage Mutant Ninja Turtles, Teenage Mutant Ninja Turtles, Teenage Mutant Ninja Turtles, Heroes in a half-shell! Turtle power! Another game from our childhood that was fun but incredibly hard to beat! The front of the controller we have the top down view part of the game where you can drive around the city and fight foot soldiers. In the middle of the controller you have to beat Rocksteady and Bebop to save April. Then on to the next challenge of defeating Mechaturtle while saving Master Splinter. On the Backside of the controller we see Raph, Mich, and Leo navigating through difficult levels while defeating enemies and Don is fighting Big Mouser while mousers are dropping on his head!

Laser engraved on approximately 5.15 x2.25 " Cherry Hardwood, The Dpad and Start/ Select buttons are made with Walnut and the A/B buttons and Stand inlay are Cedar.

***Please keep in mind the cedar wood (A B buttons and Stand) will vary in tonal color*** ***

This cedar will be more red then white in tone***

Please Allow Two to Three weeks for shipping.

Batch 1 will be limited to 50, Special edition TMNT will be limited to 25 making a total of 75 controllers.  After they sell out online the only way to get them, is to come grab one of the select few that have been put off to the side for conventions only!!

**please pick controller + stand, if you would like a stand. Located in the drop down menu***

Zelda 2.0 special edition controllers are here! We did something special for this one. Here is your chance to get a zelda controller if you happen to miss out in the past. It is the same design as Zelda 2.0 made with the special edition buttons. On the front of the controller, you can see Link fight his way through the map to try to get to the dungeon. He finally is able to make is way to one by crossing the dangerous waters and defeating his enemies. On the back you can see him navigating through the different dungeons to defeat Gannon and saving the princess. It's a true love story!

Engraved on approximately 5.15 x2.25 " Cherry Hardwood with walnut D pad, and start select buttons. And cedar A B buttons. As well as cedar inlay for the stand. Version 2.0 Special edition of this release will consist of 50 controllers labeled and numbered.

After they sell out online the only way to get them, is to come grab one of the select few that have been put off to the side for conventions only!!

Please allow Two to Three weeks for shipping.

***FRAME NOT INCLUDED***

Here it is folks! The one you've all been waiting for! A full size plaque of NES mash up games to hang on your wall. We hope when you see this piece, it brings you back to sitting in front of the TV and playing these games for hours on end. We tried to add as many classic games as we could and some hidden gems. The Start, Select, and D-pad buttons are made with Walnut, and the A, B, buttons are made out of Cedar. Can you spot all the games?!

Laser engraved on approximately 23" x 10 " Cherry Hardwood, with Walnut and Cedar buttons. Batch 1 will be limited to 50. After they sell out online the only way to get them, is to come grab one of the select few that have been put off to the side for conventions only!!

Please Allow Two to Three weeks for shipping