12 of 33 products
12 of 33 products


Klingon Special Edition Walnut
$320.00 USD
Unit price perKlingon Special Edition Walnut
$320.00 USD
Unit price perKlingon Special Edition Walnut.
Laser engraved on approximately 11.5" x 17.5" Cherry Hardwood.Â
As you can see the board has the blood of your enemies, with the inscription of "Long live the empire" and "For the honor and glory"Â
The Klingon letters are outlined with 1/8" cherry with walnut inlay and red textured paper in the background. The Klingon emblem has an outline and circle made from walnut with a cherry inlay and the same textured red paper. The design itself is meant to mimic a Bird-of-Prey warship.
The house of Mogh and house of Kor emblems are CNCed out of 1/2" solid cherry wood. Â
Kahless bat'leth is made from steel, cut with a water jet, and wrapped in a faux leather strap. It is not sharp to touch but the pointed ends can cause damage or harm so please be careful! It is held in place with magnets, and can come off/on with ease. When removing the bat’leth please lift bottom up to prevent scratches to the art work.
Qapla!Â
**The Bat'leth is not a toy, please keep away from children.**
Batch 1 will be limited to 25. After they sell out online the only way to get them is to grab one of the select few we have been put off to the side for conventions only!!
These are made to order so please allow two to three weeks for shipping.


Klingon Special Edition Cherry
$320.00 USD
Unit price perKlingon Special Edition Cherry
$320.00 USD
Unit price perKlingon Special Edition Cherry
Laser engraved on approximately 11.5" x 17.5" Cherry Hardwood.Â
As you can see the board has the blood of your enemies, with the inscription of "Long live the empire" and "For the honor and glory"Â
The Klingon letters are outlined with 1/8" walnut with cherry inlay and red textured paper in the background. The Klingon emblem has an outline and circle made from cherry with a walnut inlay and the same textured red paper. The design itself is meant to mimic a Bird-of-Prey warship.
The house of Mogh and house of Kor emblems are CNCed out of 1/2" solid cherry wood. Â
Kahless bat'leth is made from steel, cut with a water jet, and wrapped in a faux leather strap. It is not sharp to touch but the pointed ends can cause damage or harm so please be careful! It is held in place with magnets, and can come off/on with ease. When removing the bat’leth please lift bottom up to prevent scratches to the art work.
Qapla!Â
**The Bat'leth is not a toy, please keep away from children.**
Batch 1 will be limited to 25. After they sell out online the only way to get them is to grab one of the select few we have put off to the side for conventions only!!
These are made to order so please allow two to three weeks for shipping.


USS Enterprise Large
From $350.00 USD
Unit price perUSS Enterprise Large
From $350.00 USD
Unit price per***Made to ORDER***
We are going to do our best to get it to you in a timely fashion, but please note, these are very labor intensive pieces and take roughly 4 day per individual piece. Rough estimate for shipping is approximately 3 weeks.Â
We will be offering a framed option as well for this release. Please select from the drop down menu if you would like it framed. The Frame will be a simple but elegant black frame. Framing will add to delivery time by about a week.
***Note there will be some small bleeding into the wood from the color pigment***
Laser engraved on approximately 23" x 10 " Cherry Hardwood, with Cherry wood inlays. The space background is done in resin, meant to imitate a nebula. Every single resin pour will be completely unique. No two nebula's will look alike. This is truly a one of a kind piece. The stars are hand painted with white acrylic paint. Same as the smaller USS Enterprise, except the hull, and nacelle will be inlayed in cherry hardwood. This particular Enterprise is Captain Picard's ship from star trek next generation.


Ovomorph
$200.00 USD
Unit price perOvomorph
$200.00 USD
Unit price perMomma bear protecting her young? More like a proud Queen B above her badass killer babies.
The ovomorph is transparent so you can see the facehugger within.
Laser engraved on approximately 11.5" x 17.5" Cherry Hardwood.
Batch 1 will be limited to 50. After they sell out online the only way to get them, is to come grab one of the select few that have been put off to the side for conventions only!!
Please Allow Two to Three weeks for shipping


Klingon
$220.00 USD
Unit price perKlingon
$220.00 USD
Unit price perLaser engraved on approximately 11.5" x 17.5" Cherry Hardwood.Â
As you can see the board has the blood of your enemies, with the inscription of "Long live the empire" and "For the honor and glory"Â
The Klingon letters and emblem are made with 1/8" birch wood and red textured paper in the background. The design itself is meant to mimic a Bird-of-Prey warship.
Kahless bat'leth is made from steel and is wrapped in a faux leather strap. It has pattern markings of Kahless and the Emblem in the middle. It is cut with a water jet and is not sharp to the touch but the pointed ends can cause damage or harm so please be careful! It is held in place with magnets, and can come off/on with ease. When removing the bat’leth please lift bottom up to prevent scratches to the art work.
Qapla!Â
**The Bat'leth is not a toy, please keep away from children.**
Batch 1 will be limited to 50. After they sell out online the only way to get them, is to come grab one of the select few that have been put off to the side for conventions only!!
These are made to order so please allow two to three weeks for shipping.


Vader
$200.00 USD
Unit price perVader
$200.00 USD
Unit price perMay the Force be with you! Is the Dark side calling you? well here is a little something to feed your calling. Darth Vader is front and center surrounded by a Victorian boarder, with Vader's Tie fighter in each corner and the Death Star (still intact) in the background completes this piece.
Laser engraved on approximately 11.5" x 17.5" Cherry Hardwood.
Batch 1 will be limited to 50. After they sell out online the only way to get them, is to come grab one of the select few that have been put off to the side for conventions only!!
Please Allow Two to Three weeks for shipping.


Millennium Falcon V2.0
$200.00 USD
Unit price perMillennium Falcon V2.0
$200.00 USD
Unit price perThis Millennium Falcon is designed to see the outer hull and inner workings of this starship. It is split right up the center so you can check out the inner schematics, yet still, appreciate the beauty of the outer operations of the ship.
This is Batch 2 of our Millennium Falcon. Batch 1 was sold only at conventions. The difference is Batch 2 is a solid piece. Batch 1, was much like our mini Millennium Falcon, which has a birch inlay.
Laser engraved on approximately 11.5" x 17.5" Cherry Hardwood. Batch 1 will be limited to 50. After they sell out online the only way to get them, is to come to grab one of the select few that have been put off to the side for conventions only!!
Please Allow Two to Three weeks for shipping.


Death Star V.2.0
$200.00 USD
Unit price perDeath Star V.2.0
$200.00 USD
Unit price perWeither you are Dark side or Light side of the force, you can truly appreciate the beauty and magnitude of this epic star station! This is Batch 2 of our Death Star. Batch 1 was sold only at conventions. The difference is Batch 2 is a solid piece. Batch 1, was much like our mini Death star, which has a birch inlay.
Laser engraved on approximately 11.5" x 17.5" Cherry Hardwood. Batch 2 will be limited to 50. After they sell out online the only way to get them, is to come grab one of the select few that have been put off to the side for conventions only!!
Please Allow Two to Three weeks for shipping.


Back to the Future Set
From $400.00 USD
Unit price perBack to the Future Set
From $400.00 USD
Unit price perThis Amazing Back to the Future triptych includes all three Cherry hardwood plaques. Each plaque take place in a different "time" of the back to the future movies, the Delorean grounds all three plaques, spanning across each piece. Each piece is beautiful on its own, but makes a true statement when put together.
Each are laser engraved on 11.5" x 17.5" cherry hardwood. Batch 1 will be limited to 25. After they sell out online the only way to get them, is to come grab one of the select few that have been put off to the side for conventions only!!
***If you would like it framed please chose from the menu.***
Please allow Two to Three weeks for shipping.


Groovy
$160.00 USD
Unit price perGroovy
$160.00 USD
Unit price perThis Evil dead inspired piece is taken from a page of the famous necronomicon. The chain saw in lay has various scenes of the movies organized in a collage style. Each piece has its own unique blood splatter made with red acrylic paint. This piece originally debut at New York Comic Con, and will currently be on the site for the Holidays!
Laser engraved on approximately 11.5" x 17.5" Cherry Hardwood. With Birch wood inlay.
This Batch is limited to 25.
Please Allow Two to Three weeks for shipping.


ConBatch Gangs of New York
$160.00 USD
Unit price perConBatch Gangs of New York
$160.00 USD
Unit price perNever before Online, this was a strictly convention piece. For the first time ever you can now purchase from you couch in your undies.Â
The american flag is the backdrop to Bill "The Butcher" leader of the Bowery boys. "America was Born in the Streets". Is legible in the upper lefts corner.Â
Engraved on 11.5" x 17.5" Cherry Hardwood.
Please allow two to three weeks for shipping.
***Due to Covid-19 to limit everyone's exposure we will only be dropping off to the post office once per week.**


Miles
From $300.00 USD
Unit price perMiles
From $300.00 USD
Unit price perReady to take on the multiverse, Miles is laser engraved on cherry hard wood, with epoxy resin as the back ground fill.
The colors chosen for the resin go from Miles's colors of his suite which are black and red, that fade into the original SM suite colors which are red, white, and blue.Â
This is the iconic scene, when Miles takes the leap of faith and starts to trust himself.
 ***Note there may be some small bleeding into the wood from the color pigment of the resin***
Laser engraved on approximately 23" x 10 " Cherry Hardwood, The night sky is done in black, red, white, and blue resin.
 Please allow two - three weeks for shipping. If you would like it frames please note it could possible take up to four weeks. These are hand crafted pieces made to order, we take pride in our attention to detail, and chose quality over speed.Â