NES Controllers

**please pick controller + stand, if you would like a stand. Located in the drop down menu***

Metroid 2.0 special edition controllers are here! We designed this one to compliment the first batch and the cartridge. On the front of the controller, We have Samus working her way through the levels while trying to get upgrades to defeat one of the hardest bosses, Kraid! On the back you see her trying to defeat Ridley, so she can fight her way to get to Mother Brain.

Engraved on approximately 5.15 x2.25 " Cherry Hardwood with birch buttons. . As well as birch inlay for the stand.

Version 2.0 Special edition of this release will consist of 50 controllers labeled and numbered.  After they sell out online the only way to get them, is to come grab one of the select few that have been put off to the side for conventions only!!

Please allow Two to Three weeks for shipping.

**please pick controller + stand, if you would like a stand. Located in the drop down menu***

Zelda 2.0 special edition controllers are here! We did something special for this one. Here is your chance to get a zelda controller if you happen to miss out in the past. It is the same design as Zelda 2.0 made with the special edition buttons. On the front of the controller, you can see Link fight his way through the map to try to get to the dungeon. He finally is able to make is way to one by crossing the dangerous waters and defeating his enemies. On the back you can see him navigating through the different dungeons to defeat Gannon and saving the princess. It's a true love story!

Engraved on approximately 5.15 x2.25 " Cherry Hardwood with walnut D pad, and start select buttons. And cedar A B buttons. As well as cedar inlay for the stand. Version 2.0 Special edition of this release will consist of 50 controllers labeled and numbered.

After they sell out online the only way to get them, is to come grab one of the select few that have been put off to the side for conventions only!!

Please allow Two to Three weeks for shipping.

**please pick controller + stand, if you would like a stand. Located in the drop down menu***

Here it is folks!! The long awaited Zelda 2.0 controllers! We did something special for this one. We worked really hard so everyone can get a chance to get this awesome controller, so we made 100 of them. On the front of the controller, you can see Link fight his way through the map to try to get to the dungeon. He finally is able to make is way to one by crossing the dangerous waters and defeating his enemies. On the back you can see him navigating through the different dungeons to defeat Gannon and saving the princess. It's a true love story!

Engraved on approximately 5.15 x2.25 " Cherry Hardwood with Birch inlay buttons Version 2.0 of this release will consist of 100 controllers labeled and numbered.

After they sell out online the only way to get them, is to come grab one of the select few that have been put off to the side for conventions only!!

Please allow Two to Three weeks for shipping.

Teenage Mutant Ninja Turtles, Teenage Mutant Ninja Turtles, Teenage Mutant Ninja Turtles, Heroes in a half-shell! Turtle power! Another game from our childhood that was fun but incredibly hard to beat! The front of the controller we have the top down view part of the game where you can drive around the city and fight foot soldiers. In the middle of the controller you have to beat Rocksteady and Bebop to save April. Then on to the next challenge of defeating Mechaturtle while saving Master Splinter. On the Backside of the controller we see Raph, Mich, and Leo navigating through difficult levels while defeating enemies and Don is fighting Big Mouser while mousers are dropping on his head!

Laser engraved on approximately 5.15 x2.25 " Cherry Hardwood, birch wood buttons.

Please Allow Two to Three weeks for shipping.

Batch 1 will be limited to 50, Special edition TMNT will be limited to 25 making a total of 75 controllers.  After they sell out online the only way to get them, is to come grab one of the select few that have been put off to the side for conventions only!!

***please pick controller + stand, if you would like a stand. Located in the drop down menu***

Mario 2.0 special edition controllers are here! Here is your chance to get a Mario controller if you happen to miss out in the past. It is the same design as Mario 2.0 made with the special edition buttons. On this Super Mario Bros. version we have Mario dodging bullets and hammers while jumping on turtles to get the the castle. He finds the secret tunnels and vines for the extra coin. On the back he has to swim his way through fiery squid infested water level and then go and try to defeat Bowser to save the princess!

Engraved on approximately 5.15 x2.25 " Cherry Hardwood with walnut D pad, and start select buttons. And cedar A B buttons. As well as cedar inlay for the stand. Version 2.0 Special edition of this release will consist of 25 controllers labeled and numbered.  After they sell out online the only way to get them, is to come grab one of the select few that have been put off to the side for conventions only!!

Please allow Two to Three weeks for shipping.

We finally finished off the the Super Mario Trilogy!! We think Mario 2 was a great game that influenced Mario 3 to be what it was. In the front of the controller you can see right in the center the pick screen. This was the first time we could pick different characters and use their abilities. As you can see Mario, Peach, Luigi, and Toad battle their enemies in all different levels in the game. On the back, we have them going through the ice and sand levels and in the end battling Wart. We also added a few Easter eggs to give tribute to the original game it was based from.

Laser engraved on approximately 5.15 x2.25 " Cherry Hardwood, The Dpad and Start/ Select buttons are made with Walnut and the A/B buttons and Stand inlay are Cedar.

***Please keep in mind the cedar wood (A B buttons and Stand) will vary in tonal color***

Please Allow Two to Three weeks for shipping. Batch 1 will be limited to 50, Special edition Mario 2 will be limited to 25 making a total of 75. After they sell out online the only way to get them, is to come grab one of the select few that have been put off to the side for conventions only!!

***FRAME NOT INCLUDED***

Here it is folks! The one you've all been waiting for! A full size plaque of NES mash up games to hang on your wall. We hope when you see this piece, it brings you back to sitting in front of the TV and playing these games for hours on end. We tried to add as many classic games as we could and some hidden gems. The Start, Select, and D-pad buttons are made with Walnut, and the A, B, buttons are made out of Cedar. Can you spot all the games?!

Laser engraved on approximately 23" x 10 " Cherry Hardwood, with Walnut and Cedar buttons. Batch 1 will be limited to 50. After they sell out online the only way to get them, is to come grab one of the select few that have been put off to the side for conventions only!!

Please Allow Two to Three weeks for shipping

Here it is folks! The one you've all been waiting for! A custom size plaque of NES mash up games to hang on your wall. We hope when you see this piece, it brings you back to sitting in front of the TV and playing these games for hours on end. We tried to add as many classic games as we could and some hidden gems. The Start, Select, and D-pad buttons are made with Walnut, and the A, B, buttons are made out of Cedar. Can you spot all the games?!

Laser engraved on approximately 17.25" x 7.5" Cherry Hardwood. Batch 1 will be limited to 50. After they sell out online the only way to get them, is to come grab one of the select few that have been put off to the side for conventions only!!

Please Allow Two to Three weeks for shipping

***Please Note*** Con batches are meant to be sold in person, so some of the wood may have some blemishes (dark grains running though the art, or naturally occurring knots in the wood). We save these specifically for conventions so people can see it in person and decide wither or not they are okay with it. If you would like to see a picture prior to us mailing it out please send us a direct email at info@spitfirelabs.nyc with your order number and item.  All "Con Batch" items Do Not have numbers, in place of numbers it will read "ConBatch"

Engraved on approximately 5.15 x2.25 " Cherry Hardwood with wood inlay D pad, start select buttons, and A B buttons. 

Please allow Two to Three weeks for shipping.