Large Plaques

Klingon Special Edition Walnut.

Laser engraved on approximately 11.5" x 17.5" Cherry Hardwood. 

As you can see the board has the blood of your enemies, with the inscription of "Long live the empire" and "For the honor and glory" 

The Klingon letters are outlined with 1/8" cherry with walnut inlay and red textured paper in the background.  The Klingon emblem has an outline and circle made from walnut with a cherry inlay and the same textured red paper. The design itself is meant to mimic a Bird-of-Prey warship.

The house of Mogh and house of Kor emblems are CNCed out of 1/2" solid cherry wood.  

Kahless bat'leth is made from steel, cut with a water jet, and wrapped in a faux leather strap.  It is not sharp to touch but the pointed ends can cause damage or harm so please be careful! It is held in place with magnets, and can come off/on with ease. When removing the bat’leth please lift bottom up to prevent scratches to the art work.

Qapla! 

**The Bat'leth is not a toy, please keep away from children.**

Batch 1 will be limited to 25. After they sell out online the only way to get them is to grab one of the select few we have been put off to the side for conventions only!!

These are made to order so please allow two to three weeks for shipping.

Klingon Special Edition Cherry

Laser engraved on approximately 11.5" x 17.5" Cherry Hardwood. 

As you can see the board has the blood of your enemies, with the inscription of "Long live the empire" and "For the honor and glory" 

The Klingon letters are outlined with 1/8" walnut with cherry inlay and red textured paper in the background.  The Klingon emblem has an outline and circle made from cherry with a walnut inlay and the same textured red paper. The design itself is meant to mimic a Bird-of-Prey warship.

The house of Mogh and house of Kor emblems are CNCed out of 1/2" solid cherry wood.  

Kahless bat'leth is made from steel, cut with a water jet, and wrapped in a faux leather strap.  It is not sharp to touch but the pointed ends can cause damage or harm so please be careful! It is held in place with magnets, and can come off/on with ease. When removing the bat’leth please lift bottom up to prevent scratches to the art work.

Qapla! 

**The Bat'leth is not a toy, please keep away from children.**

Batch 1 will be limited to 25. After they sell out online the only way to get them is to grab one of the select few we have put off to the side for conventions only!!

These are made to order so please allow two to three weeks for shipping.

***Made to ORDER***

We are going to do our best to get it to you in a timely fashion, but please note, these are very labor intensive pieces and take roughly 4 day per individual piece.  Rough estimate for shipping is approximately 3 weeks. 

We will be offering a framed option as well for this release. Please select from the drop down menu if you would like it framed. The Frame will be a simple but elegant black frame. Framing will add to delivery time by about a week.

***Note there will be some small bleeding into the wood from the color pigment***

Laser engraved on approximately 23" x 10 " Cherry Hardwood, with Cherry wood inlays. The space background is done in resin, meant to imitate a nebula. Every single resin pour will be completely unique. No two nebula's will look alike. This is truly a one of a kind piece. The stars are hand painted with white acrylic paint. Same as the smaller USS Enterprise, except the hull, and nacelle will be inlayed in cherry hardwood. This particular Enterprise is Captain Picard's ship from star trek next generation.

***Made to ORDER***

We are going to do our best to get it to you in a timely fashion, but please note, these are very labor intensive pieces and take roughly 4 day per individual piece.  Rough estimate for shipping is approximately 3 weeks. 

We will be offering a framed option as well for this release. Please select from the drop down menu if you would like it framed. The Frame will be a simple but elegant black frame. Framing will add to delivery time by about a week.

****Note of precaution, PLEASE keep away from children, and small animals. If pieces break off they can become a choking hazard. This is meant to be displayed as art, it is not a toy****

***Note there will be some small bleeding into the wood from the color pigment***

Laser engraved on approximately 23" x 10 " Cherry Hardwood, with Cherry wood inlays. Water in done in blue resin. This is the same map as the smaller version, the larger map will have enemies, and link battling enemies placed throughout the map.

*** MADE TO ORDER***

Made to order will be shipped out as they are finalized.

 We are going to do our best to get it to you in a timely fashion, but please note, these are very labor-intensive pieces and take roughly 4 days per individual piece. It is very possible you won't receive your order for up to a months. We have multiple projects that are very labor-intensive that are happening at the same time. If it is not something you can be patients with, we ask that you please wait till a later date to purchase.

****Note of precaution, PLEASE keep away from children, and small animals. If pieces break off they can become a choking hazard. This is meant to be displayed as art, it is not a toy****

***Note there will be some small bleeding into the wood from the color pigment***

We will be offering a framed option as well for this release. Please select from the drop-down menu if you would like it framed. The Frame will be a simple but elegant black matte frame. Framing will add to the delivery time by about a week.

Engraved on Cherry Hardwood the size is approximately 17" x 7.5" with cherry wood inlays. This is a map of West eros only, the water is done in Blue and White Resin. Each resin pour will be completely unique, no two oceans will look alike.

Momma bear protecting her young? More like a proud Queen B above her badass killer babies.

The ovomorph is transparent so you can see the facehugger within.

Laser engraved on approximately 11.5" x 17.5" Cherry Hardwood.

Batch 1 will be limited to 50. After they sell out online the only way to get them, is to come grab one of the select few that have been put off to the side for conventions only!!

Please Allow Two to Three weeks for shipping

Laser engraved on approximately 11.5" x 17.5" Cherry Hardwood. 

As you can see the board has the blood of your enemies, with the inscription of "Long live the empire" and "For the honor and glory" 

The Klingon letters and emblem are made with 1/8" birch wood and red textured paper in the background.  The design itself is meant to mimic a Bird-of-Prey warship.

Kahless bat'leth is made from steel and is wrapped in a faux leather strap.  It has pattern markings of Kahless and the Emblem in the middle. It is cut with a water jet and is not sharp to the touch but the pointed ends can cause damage or harm so please be careful! It is held in place with magnets, and can come off/on with ease. When removing the bat’leth please lift bottom up to prevent scratches to the art work.

Qapla! 

**The Bat'leth is not a toy, please keep away from children.**

Batch 1 will be limited to 50. After they sell out online the only way to get them, is to come grab one of the select few that have been put off to the side for conventions only!!

These are made to order so please allow two to three weeks for shipping.

Butts, Butts, Butts. everything you love about the show, we tried to capture best we can with our vision. The main focus of the piece has Kuchi kopie's head, with Tina's hair, Louis's ear's, and Linda's Glasses. Under that is the classic burger with wings grounded by Wonder Wharf. Sprinkled in this piece you will find Easter eggs galore.

Laser engraved on approximately 11.5" x 17.5" Cherry Hardwood.

Batch 1 will be limited to 50. After they sell out online the only way to get them, is to come grab one of the select few that have been put off to the side for conventions only!!

Please Allow Two to Three weeks for shipping

May the Force be with you! Is the Dark side calling you? well here is a little something to feed your calling. Darth Vader is front and center surrounded by a Victorian boarder, with Vader's Tie fighter in each corner and the Death Star (still intact) in the background completes this piece.

Laser engraved on approximately 11.5" x 17.5" Cherry Hardwood.

Batch 1 will be limited to 50. After they sell out online the only way to get them, is to come grab one of the select few that have been put off to the side for conventions only!!

Please Allow Two to Three weeks for shipping.

This Millennium Falcon is designed to see the outer hull and inner workings of this starship. It is split right up the center so you can check out the inner schematics, yet still, appreciate the beauty of the outer operations of the ship.

This is Batch 2 of our Millennium Falcon. Batch 1 was sold only at conventions. The difference is Batch 2 is a solid piece. Batch 1, was much like our mini Millennium Falcon, which has a birch inlay.

Laser engraved on approximately 11.5" x 17.5" Cherry Hardwood. Batch 1 will be limited to 50. After they sell out online the only way to get them, is to come to grab one of the select few that have been put off to the side for conventions only!!

Please Allow Two to Three weeks for shipping.

Weither you are Dark side or Light side of the force, you can truly appreciate the beauty and magnitude of this epic star station! This is Batch 2 of our Death Star. Batch 1 was sold only at conventions. The difference is Batch 2 is a solid piece. Batch 1, was much like our mini Death star, which has a birch inlay.

Laser engraved on approximately 11.5" x 17.5" Cherry Hardwood. Batch 2 will be limited to 50. After they sell out online the only way to get them, is to come grab one of the select few that have been put off to the side for conventions only!!

Please Allow Two to Three weeks for shipping.

This Amazing Back to the Future triptych includes all three Cherry hardwood plaques. Each plaque take place in a different "time" of the back to the future movies, the Delorean grounds all three plaques, spanning across each piece. Each piece is beautiful on its own, but makes a true statement when put together.

Each are laser engraved on 11.5" x 17.5" cherry hardwood. Batch 1 will be limited to 25. After they sell out online the only way to get them, is to come grab one of the select few that have been put off to the side for conventions only!!

***If you would like it framed please chose from the menu.***

Please allow Two to Three weeks for shipping.

This Evil dead inspired piece is taken from a page of the famous necronomicon. The chain saw in lay has various scenes of the movies organized in a collage style. Each piece has its own unique blood splatter made with red acrylic paint. This piece originally debut at New York Comic Con, and will currently be on the site for the Holidays!

Laser engraved on approximately 11.5" x 17.5" Cherry Hardwood. With Birch wood inlay.

This Batch is limited to 25.

Please Allow Two to Three weeks for shipping.

This is a big What if Mother Brain found a way to leave her universe and take control of both Bowser and Ganon. Corruption of all three universes takes place and Link pursues the quest to figure out what is happening. On his quest for answers Link teams up with Mario and Samus to take down this Evil Trinity. Art credit: George Vega you can find him here: George Vega Art

Laser engraved on approximately 11.5" x 17.5" Cherry Hardwood. Limited to 50, once they sell out they will be gone for good!

Please Allow Two to Three weeks for shipping

***FRAME NOT INCLUDED***

Here it is folks! The one you've all been waiting for! A full size plaque of NES mash up games to hang on your wall. We hope when you see this piece, it brings you back to sitting in front of the TV and playing these games for hours on end. We tried to add as many classic games as we could and some hidden gems. The Start, Select, and D-pad buttons are made with Walnut, and the A, B, buttons are made out of Cedar. Can you spot all the games?!

Laser engraved on approximately 23" x 10 " Cherry Hardwood, with Walnut and Cedar buttons. Batch 1 will be limited to 50. After they sell out online the only way to get them, is to come grab one of the select few that have been put off to the side for conventions only!!

Please Allow Two to Three weeks for shipping

Never before Online, this was a strictly convention piece. For the first time ever you can now purchase from you couch in your undies. 

The american flag is the backdrop to Bill "The Butcher" leader of the Bowery boys. "America was Born in the Streets". Is legible in the upper lefts corner. 

Engraved on 11.5" x 17.5" Cherry Hardwood.

Please allow two to three weeks for shipping.

***Due to Covid-19 to limit everyone's exposure we will only be dropping off to the post office once per week.**

***Made to ORDER***

We are going to do our best to get it to you in a timely fashion, but please note, these are very labor intensive pieces and take roughly 4 day per individual piece.  Rough estimate for shipping is approximately 3 weeks. 

We will be offering a framed option as well for this release. Please select from the drop down menu if you would like it framed. The Frame will be a simple but elegant black frame. Framing will add to delivery time by about a week.

what can we say? we love supernatural, we love the fandom, we love the show. We were sad to see it end but so happy it actually happened.  It's strange to say a show lifts you up out of a funk, but somehow this show did just that. We hope we did it justice. 

 Engraved on approximately 23" x 10 " Cherry Hardwood, with bright blue epoxy resin as the back drop with the signature supernatural pentagram from the opening title card from season 10. The pentagram is hand painted in white acrylic. Baby is the main focus with the trunk open to display all the weapons she holds. The frame is a Victorian in style with some Easter eggs hidden within. Happy Hunting! 

 **The Resin design will vary which makes it a one of a kind piece, but will be made to mimic the style in the pictures.

**Chose size from the drop down**

The Tarot card Death Depicted as the Goddess Hecate.

She is  the keeper of the crossroads. She is the Goddess of boundaries the keeper of doorways and the key holder to the underworld.  As the holder of the keys that can unlock the gates between realms, she can unlock the gates of death. That is why she is perfect to hold the place of Death in the Tarot deck. This card and eventually this deck is dedicated to the Divine Feminine, and her rise. 

Death: The Death card is probably the most feared and misunderstood of all the cards in the Tarot deck. Contrary to the name it can be the most powerfully uplifting card in the deck. The Death card symbolizes the end of a major phase or aspect of your life that you release and is no longer serving you, opening up the possibility of something far more valuable and essential. You must close one door to open another.  

When Hecate shows up in your life, you are usually at a crossroads...possibly a choice has to be made. Perhaps you fear the unknown. If you allow her, she will lovingly guide you through this doorway with an open heart, as the other door that is holding you back closes.

Hecate is normally accompanied by the hounds of hell, snakes and torches. They are all present but not in typical format. the snakes and hounds are represented as tattoos, along with the symbol of death, and instead of torches, she ignites the flames in her own hands. 

Large is Engraved on approximately 11.5" x 17.5" Cherry Hardwood.

Mini is Engraved on approximately 5" x 9" Cherry Hardwood.

Batch 1 Limited to 50 per size

Please allow two to three weeks for shipping.